Even though we are only in January and there will be plenty more cold weather to come, now is a good time to start thinking about weed control. These warm spells with day time temps in the upper 60’s and low 70’s make great growing weather for winter annual weeds. No doubt you are already seeing them and the more of those warm spells we have, the bigger those weeds will get. It also means they will be harder to control later. So why not take advantage of one of those warm spells in February and put the hurt on some weeds?

There are many products on the market that will do a fine job of controlling broadleaf weeds. Probably the most well known product is 2,4-D. It gives excellent control of bitter sneezeweed, plantains, buttercup, and ragweed but relatively poor control of horsenettle and most woody weeds. One note here on 2,4-D. When applied at lower rates, it will not harm white clover. Cimmaron is widely used. This product is excellent on bahiagrass, curly dock, buttercup, wild garlic, and spiny amaranth. However, it only injures ryegrass and is poor on horsenettle. Weedmaster provides excellent control of broadleaf weeds and is the preferred product in hay operations. Try to choose a product that will control as many of the weeds that you have as possible. This will keep costs down and avoid multiple trips through the field. If more than one product must be used, try to choose products that can be mixed in the same tank and applied in one pass. Some products, like Weedmaster, can be mixed with liquid fertilizer as the carrier. Using this method, a producer could perform two functions with one pass. Also note the surrounding crops. Many of these herbicides are lethal to cotton, tobacco, and soybeans. Producers should choose a product that won’t harm surrounding crops if exposed to drift. If this is not possible try to choose a formulation that is less prone to volatilization. The more volatile a product is, the more likely you will experience product drift. Drift will also vary with boom height, nozzle type, pressure, and wind. Remedy, Crossbow, and Redeem R&P are all labeled for hay and pasture but must be used cautiously due drift dangers. GrazonNext is probably the best and most dangerous product available. The product has seen drift up to 2000 feet.

Producers should know and adhere to any grazing or haying restrictions. Some products have restrictions on grazing and haying. Others have restrictions just on haying. These restrictions can be anywhere from seven days to one year so make sure you know what you are dealing with. An interesting note here is that most products that have no grazing restrictions for beef cattle will have grazing restrictions for dairy cattle. Most will also have a withdrawal period before slaughter. Also, some products may require a private applicators license and/or training before you can purchase them.

Controlling grass weeds in pastures and hay fields is much more challenging. Most products on the market give minimal control on most grasses. Cimmaron will control bahiagrass along with certain broadleaf weeds. The ester formulation of 2,4-D will control crabgrass in newly sprigged bermudagrass for approximately three weeks. Roundup Ultra can be used to control crabgrass and sandbur if used immediately after the first cutting. GramoxoneExtra can be used to kill winter annuals in dormant bermudagrass and is safer on greening-up bermudagrass than Roundup. For control during the summer growing season, the options available are Panoramic and Pastora.

Panoramic is labeled for use in bermudagrass for the control or suppression of many grass weeds. These weeds include crabgrass, nutsedge, sandbur, Johnsongrass, vaseygrass, barnyardgrass, and others. It will cause stunting of the bermudagrass, especially if used at high rates. For this reason, Panoramic should not be used until the bermudagrass has reached full green-up and no more than six ounces per acre of the active ingredient, imazapic, should be applied regardless of the weed species you are trying to control. At this rate you will see minimal and acceptable levels of suppression to the bermudagrass. If more than six ounces are used be prepared for severe, very noticeable suppression of the bermudagrass crop. Also note that this herbicide has a lengthy restriction on overseeding rye. This will limit the use of these two products on sprayfields that will be overseeded. In these cases control of problem grasses can come from the use of spot treating with Roundup, application of Roundup with a wicking device, or Pastora.

Pastora is being used in this area with mixed reviews. Patora is labeled for bermudagrass pastures and hay fields and has no grazing or haying restrictions. Moreover, it will not cause severe stunting of bermudagrass like Journey or Panoramic, but will cause some, unless liquid nitrogen is used as the carrier. Pastora will control 25 different grass weeds and over 100 different broadleaf weeds. In field trials, it has been excellent in controlling crabgrass, vaseygrass, and johnsongrass. It will also control sand spurs however the addition of glyphosate is recommended for best sand spur control. For nutsedge (nutgrass) control, your option is a product called Outrider. It is expensive but works very well. For best control, you will need a spring and fall application.

I hear a lot of people who say they use ProductX and atrazine in late winter or early spring on their bermudagrass fields. While commonly used, atrazine does not have a label for forage crops and therefore, should not be used. If you are looking for pre-emergent control of grass weeds, a product called Prowl H2O is labeled for use in dormant bermudagrass and should be used by early March at the rate of two to three quarts per acre. It has pre-emergent control only and will not kill weeds that have already begun to grow. This product now has a zero day grazing and haying restriction.

One issue that should be addressed here is the use of MSMA, monosodium methanearsonate, on pastures and hay fields. This product will give post emergent control of crabgrass, dallisgrass, goosegrass, bahiagrass, nutsedge, and sandbur. However, it is not labeled for use in forages. The “A” in MSMS stands for arsenate, which is a derivative of arsenic. The use of this product causes a buildup of arsenicals in the plants, which can lead to poisoning of livestock that graze the forage or are fed the hay from treated fields. Horses are most sensitive followed by cattle, sheep, and goats. There are documented cases of cattle deaths due to arsenic based herbicide applications. This product should not be considered an option in weed control for forages. Alternative chemicals and/or application methods should be used.

https://www.clintonnc.com/wp-content/uploads/2020/01/web1_PaulGonzalez-1-.jpg

The Spray reel shoots waste on the field.
https://www.clintonnc.com/wp-content/uploads/2020/01/web1_Herring-farm.jpgThe Spray reel shoots waste on the field. Cindy Ivey|SI contributing photographer

A hay-baler works to complete one of dozens of rolls of hay.
https://www.clintonnc.com/wp-content/uploads/2020/01/web1_Hay-baling.jpgA hay-baler works to complete one of dozens of rolls of hay. Cindy Ivey|SI contributing photographer

Farm researchers conduct studies at the Horticultural Crops Research Station.
https://www.clintonnc.com/wp-content/uploads/2020/01/web1_Research_4.jpgFarm researchers conduct studies at the Horticultural Crops Research Station. File Photo | Sampson Independent

By Paul Gonzalez

Contributing columnist

Paul Gonzalez is an agriculture extension agent with the Sampson County Cooperative Extension Center, specializing in livestock.